|
CPU AlertCode for Alert() Illegal address access (ie: odd) |
|
|
CPU AlertCode for Alert() AutoVector Level 1 interrupt error |
|
|
CPU AlertCode for Alert() AutoVector Level 2 interrupt error |
|
|
CPU AlertCode for Alert() AutoVector Level 3 interrupt error |
|
|
CPU AlertCode for Alert() AutoVector Level 4 interrupt error |
|
|
CPU AlertCode for Alert() AutoVector Level 5 interrupt error |
|
|
CPU AlertCode for Alert() AutoVector Level 6 interrupt error |
|
|
CPU AlertCode for Alert() AutoVector Level 7 interrupt error |
|
|
CPU AlertCode for Alert() Hardware bus fault/access error |
|
|
CPU AlertCode for Alert() Check instruction error |
|
|
CPU AlertCode for Alert() Divide by zero |
|
|
CPU AlertCode for Alert() Stack frame format error |
|
|
CPU AlertCode for Alert() Illegal instruction |
|
|
CPU AlertCode for Alert() Line 1010 Emulator error |
|
|
CPU AlertCode for Alert() Line 1111 Emulator error |
|
|
CPU AlertCode for Alert() Privilege violation error |
|
|
CPU AlertCode for Alert() Spurious interrupt error |
|
|
CPU AlertCode for Alert() Trace error |
|
|
CPU AlertCode for Alert() TrapV instruction error |
|
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
General AlertCode for Alert() |
|
|
General AlertCode for Alert() Usually too many closes or a mismatched close |
|
|
General AlertCode for Alert() Usually too many closes or a mismatched close |
|
|
General AlertCode for Alert() |
|
|
General AlertCode for Alert() |
|
|
General AlertCode for Alert() |
|
|
General AlertCode for Alert() |
|
|
General AlertCode for Alert() |
|
|
General AlertCode for Alert() |
|
|
General AlertCode for Alert() |
|
|
General AlertCode for Alert() Process creation failed |
|
|
Intuition AlertCode for Alert() add SW gadgets, no memory |
|
|
Dos AlertCode for Alert() Unexpected packet received |
|
|
Audio AlertCode for Alert() |
|
|
Dos AlertCode for Alert() Invalid checksum |
|
|
Expansion AlertCode for Alert() freeed free region |
|
|
Exec AlertCode for Alert() Memory header not located. Usually an invalid address passed to exec.ExecFreeMem |
|
|
Intuition AlertCode for Alert() Recovery form of AN_GadgetType |
|
|
Dos AlertCode for Alert() Invalid init packet for cli/shell |
|
|
Intuition AlertCode for Alert() Bad Message received by IDCMP |
|
|
Dos AlertCode for Alert() Bad overlay |
|
|
Ramlib AlertCode for Alert() no overlays in library seglists |
|
|
Exec AlertCode for Alert() An attempt was made to use the old message semaphores. |
|
|
Intuition AlertCode for Alert() Bad State Return entering Intuition |
|
|
Exec AlertCode for Alert() Execbase checksum (obs.) |
|
|
Dos AlertCode for Alert() Bitmap corrupt |
|
|
Graphics AlertCode for Alert() BltBitMap, no memory |
|
|
Exec AlertCode for Alert() illegal 68k exception taken (obs.) |
|
|
Bootstrap AlertCode for Alert() boot code returned an error |
|
|
Bootstrap AlertCode for Alert() |
|
|
CIA AlertCode for Alert() |
|
|
Console AlertCode for Alert() |
|
|
Intuition AlertCode for Alert() create port, no memory |
|
|
Dos AlertCode for Alert() Disk block sequence error |
|
|
Diskcopy AlertCode for Alert() |
|
|
Dos AlertCode for Alert() Disk Error |
|
|
DiskFont AlertCode for Alert() |
|
|
Disk AlertCode for Alert() |
|
|
Dos AlertCode for Alert() |
|
|
Disk AlertCode for Alert() get unit: already has disk |
|
|
Disk AlertCode for Alert() interrupt: no active unit |
|
|
Dos AlertCode for Alert() EndTask didn't end the Task |
|
|
Exec AlertCode for Alert() 68000 exception vector checksum (obs.) |
|
|
Exec AlertCode for Alert() |
|
|
Expansion AlertCode for Alert() |
|
|
Dos AlertCode for Alert() A filehandle was closed more than once |
|
|
Exec AlertCode for Alert() Freeing memory already freed |
|
|
Dos AlertCode for Alert() Freevec failed |
|
|
Intuition AlertCode for Alert() unknown gadget type |
|
|
Gadtools AlertCode for Alert() |
|
|
Gameport AlertCode for Alert() |
|
|
Graphics AlertCode for Alert() |
|
|
Graphics AlertCode for Alert() |
|
|
Graphics AlertCode for Alert() emergency memory not available |
|
|
Graphics AlertCode for Alert() graphics out of memory |
|
|
Graphics AlertCode for Alert() MonitorSpec alloc, no memory |
|
|
Graphics AlertCode for Alert() |
|
|
Icon AlertCode for Alert() |
|
|
Exec AlertCode for Alert() InitStruct() of an APTR source (obs.) |
|
|
Exec AlertCode for Alert() No memory for interrupt servers |
|
|
Intuition AlertCode for Alert() |
|
|
Exec AlertCode for Alert() IO attempted on closed IORequest |
|
|
Exec AlertCode for Alert() Attempt to reuse active IORequest |
|
|
Intuition AlertCode for Alert() Intuition obtained a semaphore in bad order |
|
|
Intuition AlertCode for Alert() item plane alloc, no memory |
|
|
Intuition AlertCode for Alert() item box top smaller than RelZero |
|
|
Keyboard AlertCode for Alert() |
|
|
Dos AlertCode for Alert() Key already free |
|
|
Dos AlertCode for Alert() Key out of range |
|
|
Layers AlertCode for Alert() |
|
|
Layers AlertCode for Alert() layers out of memory |
|
|
Exec AlertCode for Alert() Library checksum failure |
|
|
Graphics AlertCode for Alert() long frame, no memory |
|
|
Graphics AlertCode for Alert() MakeVPort, no memory |
|
|
Math AlertCode for Alert() |
|
|
Exec AlertCode for Alert() Corrupt memory list detected in exec.ExecFreeMem |
|
|
Exec AlertCode for Alert() Sanity check on memory list failed during AvailMem(MEMF_LARGEST) |
|
|
Misc AlertCode for Alert() |
|
|
Intuition AlertCode for Alert() couldn't open the Console Device |
|
|
Workbench AlertCode for Alert() |
|
|
Intuition AlertCode for Alert() Intuition skipped obtaining a semaphore |
|
|
Console AlertCode for Alert() Console can't open initial window |
|
|
Graphics AlertCode for Alert() unsupported font description used |
|
|
Intuition AlertCode for Alert() open screen, no memory |
|
|
Intuition AlertCode for Alert() open screen, raster alloc, no memory |
|
|
Intuition AlertCode for Alert() open window, no memory |
|
|
Intuition AlertCode for Alert() plane alloc, no memory |
|
|
Dos AlertCode for Alert() Qpkt failure |
|
|
Ramlib AlertCode for Alert() |
|
|
Graphics AlertCode for Alert() regions, memory not available |
|
|
Exec AlertCode for Alert() A semaphore is in an illegal state at ReleaseSempahore |
|
|
Graphics AlertCode for Alert() short frame, no memory |
|
|
Exec AlertCode for Alert() Stack appears to extend out of range |
|
|
Dos AlertCode for Alert() no memory at startup |
|
|
Intuition AlertCode for Alert() sub alloc, no memory |
|
|
Intuition AlertCode for Alert() open sys screen, unknown type |
|
|
Trackdisk AlertCode for Alert() calibrate: seek error |
|
|
Trackdisk AlertCode for Alert() delay: error on timer wait |
|
|
Graphics AlertCode for Alert() text, no memory for TmpRas |
|
|
Timer AlertCode for Alert() |
|
|
Timer AlertCode for Alert() bad request |
|
|
Timer AlertCode for Alert() power supply -- no 50/60Hz ticks |
|
|
Trackdisk AlertCode for Alert() |
|
|
utility AlertCode for Alert() |
|
|
utility AlertCode for Alert() |
|
|
Workbench AlertCode for Alert() |
|
|
Workbench AlertCode for Alert() |
|
|
Workbench AlertCode for Alert() |
|
|
Workbench AlertCode for Alert() |
|
|
Intuition AlertCode for Alert() Weird echo causing incomprehension |
|
|
Workbench AlertCode for Alert() |
|
|
Device AlertCode for Alert() |
|
|
Resource AlertCode for Alert() |
|
|
Resource AlertCode for Alert() |
|
|
Device AlertCode for Alert() |
|
|
AlertCode for Alert() |
|
|
Library AlertCode for Alert() |
|
|
Resource AlertCode for Alert() |
|
|
Library AlertCode for Alert() |
|
|
Library AlertCode for Alert() |
|
|
Library AlertCode for Alert() |
|
|
AlertCode for Alert() |
|
|
Device AlertCode for Alert() |
|
|
Library AlertCode for Alert() |
|
|
Library AlertCode for Alert() |
|
|
Library AlertCode for Alert() |
|
|
Device AlertCode for Alert() |
|
|
Library AlertCode for Alert() |
|
|
Library AlertCode for Alert() |
|
|
Library AlertCode for Alert() |
|
|
Resource AlertCode for Alert() |
|
|
Library AlertCode for Alert() |
|
|
Device AlertCode for Alert() |
|
|
Device AlertCode for Alert() |
|
|
AlertCode for Alert() |
|
|
Library AlertCode for Alert() |
|
|
AlertCode for Alert() |
|
|
CPU AlertCode for Alert() Alert type. Error can not be recovered, Computer must be restarted. |
|
|
CPU AlertCode for Alert() Alert type. Error can be recovered, system can continue running. |
|
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
ErrCode for TIORequest.io_Error or TIOStdReq.io_Error request terminated early AbortIO |
|
|
ErrCode for TIORequest.io_Error or TIOStdReq.io_Error invalid address (misaligned or bad range) |
|
|
ErrCode for TIORequest.io_Error or TIOStdReq.io_Error not a valid length (usually IO_LENGTH) |
|
|
ErrCode for TIORequest.io_Error or TIOStdReq.io_Error command not supported by device |
|
|
ErrCode for TIORequest.io_Error or TIOStdReq.io_Error device/unit failed to open |
|
|
ErrCode for TIORequest.io_Error or TIOStdReq.io_Error hardware failed self-test |
|
|
ErrCode for TIORequest.io_Error or TIOStdReq.io_Error device opens ok, but requested unit is busy |
|
|
||
|
Representation of False for Amiga function |
|
|
One or some Library functions are changed. |
|
|
Library should be closed but an other tasks still use it. Waiting. |
|
|
The checksum of Library is currently being calculated. |
|
|
A checksum error of a Library results into a reset. |
|
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
Representation of True for Amiga functions |
|
|
Memory Requirement Type. DMAable memory within 24 bits of address. |
|
|
Memory Requirement Type. Any type of memory will do. |
|
|
Memory Requirement Type |
|
|
Memory Requirement Type. Clear the memory when allocate. |
|
|
Memory Requirement Type |
|
|
Memory Requirement Type. Memory that can be used for KickTags. |
|
|
Memory Requirement Type. Return the largest available memory block. |
|
|
Memory Requirement Type |
|
|
Memory Requirement Type. Do not cause expunge on failure |
|
|
Memory Requirement Type. |
|
|
Memory Requirement Type |
|
|
Memory Requirement Type. Return the total size of Memory. |
|
|
0 = First time, 1 = recycle |
|
|
We did all we could do |
|
|
||
|
||
|
Nothing we could do |
|
|
We did some, try the allocation again |
|
|
For TNode.ln_Type |
|
|
For TNode.ln_Type |
|
|
For TNode.ln_Type identifies a device |
|
|
For TNode.ln_Type |
|
|
For TNode.ln_Type |
|
|
For TNode.ln_Type Message has beed freed |
|
|
For TNode.ln_Type |
|
|
For TNode.ln_Type identifies an interrupt |
|
|
For TNode.ln_Type |
|
|
For TNode.ln_Type |
|
|
For TNode.ln_Type |
|
|
For TNode.ln_Type indicates message is currently pending |
|
|
For TNode.ln_Type identifies a message port |
|
|
For TNode.ln_Type identifies and Amiga Dos process |
|
|
For TNode.ln_Type Message has been replied |
|
|
For TNode.ln_Type |
|
|
For TNode.ln_Type |
|
|
For TNode.ln_Type identifies an signal semaphore |
|
|
For TNode.ln_Type Internal flag used ny SoftInits |
|
|
For TNode.ln_Type identifies an Exec Task |
|
|
For TNode.ln_Type |
|
|
For TNode.ln_Type User nodes type. |
|
|
Ignore arrival in TMsgPort |
|
|
Signal task in mp_SigTask in tMsgPort |
|
|
Signal SoftInt in mp_SoftInt/mp_SigTask in TMsgPort |
|
|
Mask for all PA_* tMsgPort Flags |
|
|
Matchword for rt_MatchWord |
|
|
Flag for rt_Flags |
|
|
Flag for rt_Flags |
|
|
Flag for rt_Flags |
|
|
Flag for rt_Flags |
|
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
Flag Bit for tc_Flags |
|
|
Flag Bit for tc_Flags Task gets no CPU time. |
|
|
Flag Bit for tc_Flags Task is switched to CPU. |
|
|
Flag Bit for tc_Flags Task uses CPU. |
|
|
Flag Bit for tc_Flags Stack is checked. |
|
|
Flag Bit for tc_Flags Task is switched away from CPU. |
|
|
Flag value for tc_Flags |
|
|
Flag value for tc_Flags Task gets no CPU time. |
|
|
Flag value for tc_Flags Task is switched to CPU. |
|
|
Flag value for tc_Flags Task uses CPU. |
|
|
Flag value for tc_Flags Stack is checked. |
|
|
Flag value for tc_Flags Task is switched away from CPU. |
|
|
Task State for tc_State Task is currently inserted in List. |
|
|
Task State for tc_State Task gets no CPU time. |
|
|
Task State for tc_State Invalid Task. |
|
|
Task State for tc_State Task is ready to work. |
|
|
Task State for tc_State Task is removed at the moment. |
|
|
Task State for tc_State Task is running. |
|
|
Task State for tc_State Task is waiting for a signal. |
|
|
tUnit is accessable |
|
|
tUnit is currently working |
|